Any Questions? Call us at: 1-800-780-9830
AQUABOT.US Aquabot.us automatic swimming pool cleaning solutions Ultramax Commercial Pool Cleaner

Aquabot T2 Turbo PRODUCT SEARCH | CART | PRODUCTS | CHECKOUT | ABOUT | CONTACT



MAIN
CLEANERS

PARTS
Residential
Commercial

Parts for Aquabot Turbo T4 Versions 2004-5

      AQUABOT TURBO T4 (version 2004-2005)      
             
  Item # Part # ITEM NAME ( Description ) - Cleaner Model(s) it belongs to Units S.R.P.  
             
  1 A10000BK HANDLE ASSY. (Black & White, Bracket included) - Aquabot Turbo T4 EACH $103.88
  2 S1100BK HANDLE BRACKET (Black) - Aquabot Turbo T4 EACH $34.85
  4 11003 CLEVIS PIN (Round Head, hole in end) - Use to link the Handle Assembly arm to the Handle Bracket EACH $2.86
  6 11004 WASHER (St.Steel) - Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket EACH $0.83
  7 11005 COTTER RING (Aluminum, 3/16") - Use at end of the Clevis Pin to hold the Handle Bracket EACH $0.83
  8 1105 SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly EACH $1.27
  9 2701 SCREW (#8, 11/16", Phil Pan Head) - Use to fasten the Pump Motor to the Body Assembly EACH $1.27
  12 2104 P-CLIP (3/8", Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Body EACH $1.27
  12 2110 P-CLIP (5/8", St.Steel) - Use to fasten the foam-insulated part of a 4-wire cable to the Handle Assy. EACH $2.44
  12 2111 P-CLIP (5/8", Coated Steel) - Use to fasten the insulated part of a 4,7,9-wire cable to the Handle Assy. EACH $2.44
  13 2700 SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips and Drive Motors EACH $1.27
  14 2260 SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use to fasten P-Clips and H-Float EACH $1.27
  15 1636 PLUG (7-Pin, Female, 7-Wire) - Aquabot Turbo T4, Aquamax Biturbo RC EACH $45.79
  16 S7935 EZ-SWIVEL (For 4,5,7,or 9-wire Cable) - Can be used on any Cable Assembly with 4 or more wires ASSEMBLY $46.62
  17 A16575 CABLE ASSY. (5-Wire, 75 Foot, Floating, Black, uses 7-Pin Plug / Socket) - Aquabot Turbo T4 (version 2004-2005) EACH $456.53
  25 5062BK OUTLET TOP (Black, Dome) - Aquabot Turbo T2, Aquabot Turbo T4 (version 2004-2005) EACH $12.70
  26 A5092TAN BODY ASSY. (Tan, with Lock Tabs, Outlet Ring, Inserts) - Aquabot Turbo T4 EACH $138.65
    1629 DOME PLUG (Black, Plastic) - Use to plug large holes on the Body Assembly of the Aquabot Turbo T2 / T4 EACH $0.83
  27 1129 SCREWS (6/32" Pan Head Phillips) - Use to fasten the Outlet Top on the Aquabot Turbo T2 / T4 EACH $1.27
  29 SP2300BK ANTI-ROLL BRACKETS (Plastic, Black) - Aquabot Turbo T2, Aquabot Turbo T4 SET OF 4 $11.77
    2400 NAIL PLUG (White, Plastic) - Use to plug small holes on the Body Assembly EACH $1.27
  30 SP3402 LOCK-NUTS (Hex, Nylon insert, for various uses: Sideplate Bolts, Anti-Roll Brackets, Pole Handle Assy.) SET OF 8 $6.72
  31 2261 SCREW (M-5, Phil Bev Head) - Use to fasten the Anti-Roll Brackets to the Body Assembly EACH $1.27
  36 SP9204BK LOCK-TABS (Black, Plastic) - Aquabot Turbo T2, Aquabot Turbo T4 SET OF 2 $3.60
  38 2303 SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly EACH $1.27
  39 7133 LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs EACH $0.83
  40 1628 GROMMET (Rubber) - Use around Cable Assembly on Body - Aquabot T2 / T4, All ThunderJet cleaners EACH $2.44
  42 2661 BUSHING (Black, Plastic, Use at end of Wheeltube Axle) EACH $2.44
  45 3400BK SIDEPLATE (Black, no holes) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $27.88
  45 3400BK-8H SIDEPLATE (Black, no holes) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $0.00
  47 3397 JET BRACKET (Black, Plastic, Fits in Sideplate) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $11.21
  49 SP3401 SCREW (Bolts, Long, For Sideplate) - Aquabot Turbo T4 SET OF 8 $9.54
  51 2600BK BUSHING (Black, Plastic) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $2.76
  52 2610BK BUSHING (Black, Plastic, Use for Pin on Body Assembly) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $4.66
  55 3700 LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body Assembly Pin Support EACH $3.60
  56 3506 STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs) EACH $2.76
  57 SP3302 DRIVE BELTS (Tan) PAIR $17.38
  58 A3605 PULLEY ASSEMBLY (Medium, ~ 2.75 inches) - Use for cleaners with Black Drive Motors EACH $33.81
    3607 WASHER (Use on All Pulley Assemblies, Use on Movable Axle of Jet / Rover cleaners, Rounded edges facing inward) EACH $5.83
  60 A6005-03 PUMP MOTOR (Aquabot Turbo T2, T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax, PHV 100 / 200) EACH $213.79
  61 4402 PROPELLER - Aquabot Turbo T2/T4, AquaJet, JetMax/Junior, Pool Rover/Plus/Junior, ThunderJet cleaeners EACH $12.25
  63 6027 IMPELLER (Red) - Aquabot T2 / T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax / Jr, PHV 100 / 200 EACH $12.25
  64 6028 IMPELLER HOUSING (Red) - Aquabot T2 / T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax, PHV 100 / 200 EACH $12.25
  65 300096 TUBING (Clear PVC, 5/16"ID x 1/2"OD) - Use to divert water from the Impeller to the to the Jet Bracket PER FOOT $1.10
RC 65 S2010 DC PUMP FILTER (Black, Plastic) - Aquabot Turbo T4 ASSEMBLY $13.76
  67 700038 SPACER BLOCK (Grey, Stepped shape) - Use to position the Piston apart from the Model G Drive Tracks EACH $10.58
RC 68 S300093 DC PUMP MOTOR (Dual, with Gate, 2-Wire) - Aquabot Turbo RC, Aquabot T4, All Aquamax RC cleaners EACH $74.62
  69 300111 TUBING (Clear PVC, 3/16"ID x 5/16"OD) - Use to divert water from the DC Pump to the Piston Assembly PER FOOT $1.10
RC 70 300109 CLAMP (Grey, Plastic, Narrow) - Aquabot Turbo Solo / RC / T4, All Aquamax RC / Solo cleaners EACH $2.27
  70 300108BK CLAMP BRACKET (Black, Plastic, Wide) - Aquabot Turbo T4 EACH $2.27
RC 71 300107 BACK PLATE BLOCK (Grey, 4 holes) - Use to support the DC Pump Motor inside of the Body Assembly EACH $2.27
RC 72 6204 SPACER (Plastic, cylinder) - Use to make space between the Back Plate Block and the Body Assembly EACH $0.83
RC 73 1107 SCREW (10-32, 1-3/4" Phil Pan Head) - Use to fasten Clamp & Piston onto Sideplate of a Model G cleaner EACH $1.27
RC 73 2301 SCREW (10-32, 1/2" Phil Pan Head) - Use with Clamp to fasten Piston to Sideplate and DC Pump to Block EACH $1.27
RC 74 2700 SCREW (#8, 11/16", Phil Pan-Flat Head) - To fasten the Clamps around the DC Pump to the Plate Block PAIR $1.27
RC 75 7109 WASHER (St.Steel) - Use with # 2500 screw against Body Assembly to fasten Back Plate Block to Body EACH $0.64
  77 S300090 PISTON ASSEMBLY (White, Plastic) - Two are used for Aquabot Turbo T4 cleaner EACH $68.67
  78 300084 RUBBER TIP (White, Rubber) - Use at the bottom of the plunger of the Piston Assembly EACH $2.27
  80 A8542 DRIVE MOTOR (Black, bare wire leads) - Aquabot Turbo T4 EACH $309.33
  83 4613 SPIRAL PIN (3/4", solid Stainless Steel) - Used in the end of the Drive Motor shaft, use Lock-Tite EACH $1.27
  86 SP5474 SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal) PAIR $2.54
  87 SP1617 SHRINK TUBE (5/16", Blue) - For sealing 2-wire connections, use under Heat Shrink 1619 4 FEET $46.64
  87 SP1618 SHRINK TUBE (1/8", Black) - For sealing the bare thin wires of the IR Sensors and inide of Power Supply 4 FEET $46.64
  87 SP1619 SHRINK TUBE (1/2", Black) - For sealing 2-wire connections, use over Heat Shrink 1617 4 FEET $46.64
  88 1625 SHRINK TUBE (3/4", Black) - For sealing all medium sized connections at the Junction Box 4 FEET $46.64
  90 A38008 WHEEL TUBE ASSY (Aquabot Turbo T4) EACH $69.94
  91 11058 RETAINING RING (E-Clip, New Style) - Aquabot Turbo, AB Plus RC, Aquabot T4, AB Ultra, All AMAX / UMAX EACH $3.67
  92 3603 WASHER (Nylon, Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly EACH $1.27
  97 SP3003B RUBBER BRUSHES (Black Molded Rubber, Short) - Aquabot / Turbo / T4, Aquamax Jr units, Ultramax *** PAIR $77.89
  99 3200 DRIVE TRACK (Black) EACH $22.24
  99 3203 DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units EACH $22.24
  100 SP2675 MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks SET OF 4 $4.88
  101 8100 FILTER BAG (Fine) - Aquabot / Turbo / T2 / T4 / Plus RC, Aquamax Jr, PHV 100/300, small Jet / Rover, UMAX ** EACH $48.97
  101 8100S FILTER BAG (Fine) - Aquabot Turbo T2, Aquabot Turbo T4 EACH $46.75
  101 8200 FILTER BAG (Mesh) - Aquabot / Turbo / Plus RC, Aquamax Jr, PHV 100/300, small Jet & Rover, UMAX ** EACH $46.75
  103 A5083 FILTER SCREEN (Blue, Rounded cage) - Aquabot Turbo T2, Aquabot Turbo T4 (version 2004-2005) EACH $27.88
  105 A9200XTAN BOTTOM LID ASSY. (Tan, W-shaped Wire Frame) - Aquabot Turbo T4 (version 2004-2005) EACH $92.11
  106 9305BL INTAKE VALVE FLAP (Blue Plastic) - Fits into Intake of All small # 9200 Bottom Lids EACH $4.60
  108 S3103 H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough ASSEMBLY $11.64
  109 SP3104 SIDE POCKET FLOATS (White, Foam Blocks) - Put in Bottom Lid if wall-climbing is not high enough PAIR $3.71
  110 A7097 POWER SUPPLY (7-Pin, Male Socket, 7hr External Dial Timer, Radio RC) - Aquabot Turbo T4 EACH $355.16
  111 7136 SOCKET ASSY. (7-Pin, Male, 7-Wire) - Aquabot T4, All Aquamax RC cleaners, Old Aquabot Plus RC / Ultra EACH $34.05
  112 7206 FUSE HOLDER (MINI, Phillips Head style) - Use for All Power Supplies with Dial Timers EACH $8.14
    7207 FUSE (2.5 Amp, MINI, 250 Volt, Slow- Blow) - All Residential cleaners with Dial Timer Power Supply EACH $3.07
  114 7105 LIGHTED SWITCH (Thin, 1¼" x ½", Red with Light, 3-Wire) - Use for Power Supply EACH $8.16
  114 7208 NON-LIGHTED SWITCH (Thin, 1¼" x ½", Red, 3-Wire) - Use for Power Supply with Dial or Digital Timer EACH $8.16
  115 7023 ANTENNA (4", with Hardware) - Aquabot T4, Aquabot Plus RC, Aquabot Ultra, UMAX Junior, Ultramax EACH $11.66
    A220204KIT RECEIVER & TRANSMITTER KIT - Aquabot Turbo T4 (version 2004-2005 and 2006) - - - - - - - - - - - KIT includes matched A220114C Radio RC Transmitter (Grey / Yellow face) and A220204FCC Receiver SET OF 2 $322.45
    A220204FCC RECEIVER (Radio, 4-Way) - Aquabot Turbo T4 (version 2004-2005), and Aquabot Turbo T4 (version 2006) - - - - - - - - FOR NEW Units only - Responds to A220114C Transmitter - Older units will need order KIT EACH $233.14
  116 220114C TRANSMITTER (Radio RC, Grey & Yellow/ Blue???/ Red LED light) - Aquabot Turbo T4, Ultramax units -- -- -- FOR NEW Units - Ultramax uses A220203FCC Receiver /// Turbo T4 uses A220204FCC Receiver EACH $89.32
  117 7041A HANDLE (Plastic, with Hardware) - Use on All Power Supplies except Ultramax ASSEMBLY $6.23
  118 7102 CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - Use on All Power Supplies EACH $11.66
  119 7074 TIMER 7 HOUR (Front Dial, Adjustable) - Aquabot Turbo, Aquabot Turbo Solo, Aquabot Turbo RC, T2, T4 EACH $52.47
           
    800070 NOVUS 2 Plastic Polish 24 oz. Bottle - Polish for the plastic components EACH $80.56
    1609 TIE (Blue, #4, Plastic, reusable) - Use for coiling the Cable Assembly among other things EACH $1.27
    A800135 MAIN DRAIN BUMPER - Can be used on most Pools' Main Drain, where a cleaner may get stuck EACH $40.28

Home - Products - Search - Checkout
© Copyright AQUABOT.US
Aquabot
Click on the image to see our authorized dealer seal